1
Install the flowmeter
It's simple. The flowmeter comes with a 3/8" threaded connection that fits directly to all standard filters. Mount the flowmeter on the filter head2
Mount it!
Mount the electronics box using tape, screws or zip ties. Ideally you want to place it in the open and as high as possible in order to get the best signal3
Plug it in!
Plug the flowmeter into the electronics box. This also turns on the device, which you hear from the brief beep4
Let it connect!
After the initial beep is over, the device is automatically connecting to our network. When you hear 4 short beeps, the device is connected and everything is running5
That's it!
The device is now connected, and everything is as it should be. Everytime a water flow is measured, the device transmits the data and we process it6
Add it in our backoffice
Finally, add the filter in the Flowplan Backoffice by entering the details and the 10-digit serial number written on the Beam
